![background image](http://html1.mh-extra.com/html/ace-sports/maxxam-150-2r/maxxam-150-2r_service-manual_3891384067.webp)
6
3
IGNITION COIL
IGNITION COIL REMOVAL
• Remove the spark plug cap.
• Remove the primary ignition coil wire.
• Remove the ignition coil-positioning bolt, and remove the ignition coil.
IGNITION COIL INSTALLATION
• Reverse the removal procedure for installation.
When installing, connect the black/yellow wire of the primary ignition coil with the
black/yellow connector of CDI, and the green wire
CDI.
with the green connector of the
PRIMARY IGNITION COIL INSPECTION
Standard Value
a.&
,IWKHUHVLVWDQFHYDOXHLVLWLQGLFDWHVWKHFRLOLVEDGDQGVKRXOGEHUHSODFHG
SECONDARY IGNITION COIL INSPECTION
Install the spark plug cap, and measure the resistance value of the secondary ignition coil.
Standard Value
a.&
If the resistance value is in the standard range, it is good; however
LQGLFDWHVWKHFRLOLVEDG
Remove the spark plug cap, and measure the resistance value of the secondary ignition coil.
Standard Value
a.&
If the resistance value is in the standard range, indicates it is good; however
LQGLFDWHVWKHFRLOLV
bad.
The ignition coil also can be inspected and measured with the ignition testing instrument.
Please operate properly according to the instructions.
6HWWKHPHDVXULQJVZLWFKRIWKHLJQLWLRQFRLORQWKH9SRVLWLRQDQGFRQQHFWWKHLJQLWLRQFRLO
Turn the switch of the testing instrument to the “ON” position. Observe the spark and
inspect the spark situation of the ignition coil. If it is a normal consistent spark, it is good; if
WKHVSDUNGRHVQRWÀDVKFRQVLVWHQWO
y, it is not good.
SPARK PLUG
• Clean the carbon around the spark plug to prevent it from dropping into the cylinder. Remove the
spark plug.
Summary of Contents for Maxxam 150 2R
