![background image](http://html1.mh-extra.com/html/ace-sports/maxxam-150-2r/maxxam-150-2r_service-manual_3891384038.webp)
3
4
ELECTRICAL STARTING SYSTEM
STARTER MOTOR
The starter motor is actually a direct current (DC) motor, and its structure is shown in the picture.
1. Outer
Cover,
Motor
7.
O-ring
2. Rotor,
Motor
8.
O-ring
3. Base, Carbon Brush
9. Bolt
4. Plate,
Positive
Electrode
10.
Spring
Washer
5. Carbon Brush, Positive Electrode
11. Washer
6. Carbon Brush, Negative Electrode
12. O-ring
13. Screw
STARTER MOTOR REMOVAL
%HIRUHUHPRYDO¿UVWVKXWR
ff the main switch, and
disconnect the battery connecting wire. Then press
the starting button
;
at this time the starter motor
should not run.
Do this
to insure safety.
• Remove the starter motor lead wire clamp.
• Remove the starter motor holding bolt, and remove the starter
motor.
• Roll up the rubber wate
-
resistance cover, and remove the
starter motor joint.
• Remove the motor case bolt, the carbon brush seat, and the
motor case, etc.
Summary of Contents for Maxxam 150 2R
