Ace Sports Maxxam 150 2R, Service Manual

Page: 66 / 79

6
2
TRIGGER WINDING
• Remove the connector of the trigger winding wire.
• Measure the resistance value between the trigger winding (green/red wire) and the body ground
wire.
Standard Value aŸƒ&
When the actual value is more than the standard value, it should be replaced.
CDI COMPONENT
7KH&',FRPSRQHQWLQVSHFWLRQLVVLPLODUWRWKHUHJXODULQVSHFWLRQ7KH&',
component inspection
winding or
is also divided into two steps: First inspect every wiring,
FRLOFRQQHFWHGZLWK&',WKHQLQVSHFWWKH&',FRPSRQHQW
REMOVE THE CDI COMPONENT.
‡&KHFNWKHFRQQHFWRUIRUORRVHQHVVRUHURVLRQ
‡,QVSHFWWKHFRQGXFWLRQDQGWKHUHVLVWDQFHYDOXHRIWKHPDLQVZLWFKWKHLJQLWLRQFKDUJLQJFRLO
the trigger winding, and the ignition coil. When the main switch is in “OFF” position, it should be
conducted. The resistance value of every coil should be the standard value.
‡,QVSHFWWKHUHVLVWDQFHYDOXHEHWZHHQHYHU\&',FRPSRQHQWWHUPLQDO,IWKHDFWXDOYDOXHLVQRWLQ
WKHUDQJHRIWKHYDOXHLQWKHFKDUWWKHQWKH&',FRPSRQHQWLVIDXOW\
.
CDI COMPONENT
SW (B/W) EXT (B/R) 3&*5 (*RU*: ,*1%<
SW (B/W)
a’ a’ a’ ’
EXT (B/R) 0.5 ~ 50
a’ ’ ’
3&*5
10 ~ 1000 10 ~ 1000 1 ~ 100
’
(*RU*:C 0.5 ~ 50 0.5 ~ 50 1 ~ 10 ’
,*1%< ’ ’ ’ ’
%%ODFN W :KLWH55HG**UHHQ < - < ellow
7KH&',FRPSRQHQWFDQDOVREHLQVSHFWHGDQGPHDVXUHGZLWKWKH&',WHVWLQJLQVWUXPHQW
Please carefully read the instrument speci ¿FDWLRQWRNQRZKRZWRSURSHUO\RSHUDWH
‡&RQQHFW&',FRPSRQHQWZLWKWKHVSHFLDOZLUHRIWKHWHVWLQJLQVWUXPHQW
‡2EVHUYHWKHVSDUNFRQGLWLRQRQWKHLQVWUXPHQWZKHQWKHVZLWFKLVWXUQHGRQGLI
ferent positions
(OFF, P, EXT
2121