background image

Do not try to operate your model if you find your radio is not working properly. Check out the radio as following steps. 

If you can not solve the problems then contact with the Thunder Tiger authorized distributor for service.

TROUBLE SHOOTING

Thank you for purchasing of the ACE RC COUGAR Radio. Thunder Tiger strives to bring you the highest level of 

quality and service we can provide. We race and test our products around the world to bring you state-of-the-art 

items. Thunder Tiger guarantees that you should enjoy many hours of trouble free use from our R/C products. 

Thunder Tiger products have been sold worldwide through the authorized distributors that are supported directly and 

rapidly from Thunder Tiger. You may find that Thunder Tiger is always pursuing to explore new items creatively with 

highest quality. To update the latest product information and to get the best technical support, please feel free to 

contact your local hobby shops or Thunder Tiger authorized distributor.

SERVICE

Situation

 

No Voltage

Servo Works Improperly

Short Distance

No Actions

Battery

Dead battery-Change the batteries. Recharge the batteries.
Batteries inserted incorrectly-Reload the batteries in accordance with the polarity markings
Bad contact-Check to see if the contacts are bent and not making good contact
Dirty contacts-Clean the contacts and check for corrosion.

Monitor LED

Check the LED on the rear of the transmitter-Refer to the " Binding Process "

Battery

Dead battery-Replace or recharge
Wrong polarity-Check connections

Antenna

Near other wiring-Move away from wiring
Was antenna cut-Request repair
Is the antenna installed correctly-Refer to the receiver installation.

Monitor LED

Check the LED of the receiver-Refer to the " Binding Process "

Connector connections

Wiring incorrect-Insert all connectors firmly
Loose connections-Push the connector in firmly

Motor (Electric powered)

Noise problems-Install capacitors on motor

Transmitter

Solution

JC6267

FCC ID:VEJTT-FHM2P4G-A14

2.4GHz Digital Radio System

Summary of Contents for Cougar PS3i

























Reviews: