Page4
Do not destroy modules,
tear down modules.
Do not mark the
back of modules
with sharp materials.
Do not drop or
allow objects to
fall onto module.
Do not install the
module or mounting
system in high
corrosion areas.
Please do not install the panel
in the place where the sunlight
may be blocked from getting to
the panel.
Keep away from fire.
Do not drill holes in
frame.
The module must not be
immersed in water (either
fresh or salt) or constantly
be exposed to water (either
fresh or salt) (i.e. from
fountains, sea spray).
Do not install module
near flammable
gases.
Do not install module on smooth roof.
Flammable
Gases
The light intensity of
street light can not
recharge to battery
throught solar panels.
Installation
High temperature will reduce the performance of module, lowering power output.
Good ventilation can effectively reduce the effect of power loss due to excessive heat.
Panels should be installed in a well ventilated location.
The solar panels are water resistant but not waterproof. Do not submerge in water or
expose the panel to a continual flow of water.
The length of the wire between panel and the battery case is 5m, please conduct the
installation after confirming the distance.
