Page5
Installation
Electrical
Connection
Controller Installation
Lamp Installation
100mm
Electrical Connection
STEP1
Press the button on the top of the PowerPack to the "ON" position before use.
Mounting Hole
Back View
Use a blunt object to depress the switch.
IMPORTANT:
Turn switch off for long term
storage.
The Power Pack and
the lamps are
designed for indoor
(protected) use only.
Hang the lamp based on requirements.
Knock two nails into the wall
which the PowerPack is going
to be installed, with the distance
of 100mm between the two nails.
Hang the Power Pack on the wall.
Main Switch
The PowePack & lamps
should be installed in a
shaded location, avoiding
direct sunlight and must
be free from moisture.
Do not invert the
,
the leak of battery fluid
caused by invert will result
in the damage of battery.
PowePack
The surface temperature of
the controller will heat up
during use, please avoid
contact and exposure with
combustibles.
