10
IMPORTANT!
Both DIP switches must be set in the same way.
5.4.2 How to earth your record player?
A record player has to be connected to the earth / ground. The POWER ES offers two possible
connections:
An
earth contact
5.1 (connection with the housing) and a
ground contact
5.2 (connection with
internal POWER ES main board).
In most cases the use of the ground contact 5.2 is the better choice, so try out this possibility first.
5.5 Loudspeaker cables
For each channel the POWER ES has one pair of high quality loudspeaker terminals. Please use only
high quality loudspeaker cables. This is the only way to ensure that the sound quality of the power
amplifier is fully exploited.
Loudspeaker cables from ACCUSTIC ARTS
®
are excellently matched to the needs of the POWER ES.
But naturally other high quality brand name products may also be used.
To connect the cables to the power amplifier or loudspeakers if possible use high quality terminal ends
or banana plugs
*)
and avoid connecting bare litz wires (except with OFC copper cables) since these
corrode and so restrict the signal flow.
