8
Minimum
Maximum
Fig. 4:
ACCUSTIC ARTS
®
remote control – RC II
reducing volume
increasing volume
5.3 Use of the analog input
SURROUND
The
SURROUND
input
is a special input configuration that allows the signal from a surround
processor to pass through this integrated amplifier with
no gain
. The volume will be controlled by the
surround processor.
WARNING!
You can not connect “standard” units like for example a CD-Player to this input. In the
SURROUND configuration the volume of this input is not controlled, this means that the
incoming signal is transferred unchanged to the speaker outputs. This could otherwise lead to
very high volume levels and do serious harm to your connected loudspeakers.
The
SURROUND
input will be activated by turning the rotary switch 10 into position >
SURR.
<
5.4 Optional MM/MC phono module
