5
4 Positioning
For reasons of better access to the various input and output sockets we recommend you position the
unit in an audio rack. Professionally designed audio racks, e.g. from ACCUSTIC ARTS
®
, can have a
positive effect on the music reproduction of your audio system.
Please observe at all times:
●
Ensure that the unit has sufficient air around it and avoid extreme temperature influences
on the unit, especially direct sunshine and high humidity.
●
Before you connect the unit with some other unit using a cable, please never forget that
both units must first be switched off and disconnected from the mains power.
●
DANGER OF FIRE! Please never cover the ventilation slots. This could lead to overheating
of the power amplifier and cause serious damage. Therefore leave a minimum of 5 cm
distance at the sides and 10 cm distance above the housing cover.
5 Installation and start-up
Fig. 1:
Rear view of POWER ES (without phono module)
Description of
Fig. 1
:
1
Mains power switch
2
FUSE:
Fuse holder for the main fuse (plastic cap with integrated fuse)
3
SPEAKER LEFT:
Left pair of loudspeaker output sockets
4
SPEAKER RIGHT:
Right pair of loudspeaker output sockets
5.1
Earth contact (for an external device, like a record player/turntable)
please see chapter
5.4.2
before use
5.2
GND:
Ground (option; only available with the optional phono module)
please see chapter
5.4.2
before use
6
INPUT 1:
Unbalanced input (RCA) for connection of reproduction device 1
optional available as phono input for MM and MC; see chapter
5.4
7
INPUT 2 to 4:
Unbalanced input (RCA) for connection of reproduction device 2, 3 and 4
