6
8
SURROUND:
Unbalanced input (RCA) configured as “SURROUND BYPASS”
(before use, please see chapter
5.3
)
9
Earth contact e.g. for a shielded speaker cable like the ACCUSTC ARTS
®
PREMIUM LINE – MK 2
Fig. 2:
Front view
Description of
Fig. 2
:
10
IN 1 – IN 2 – IN 3 – IN 4 – SURR.:
(SURR. = SURROUND-BYPASS)
Rotary switch to select input of reproduction device
11
REMOTE:
Infrared remote control receiver for volume control
12
ON:
LED (blue) indicates unit is ready for operation
13
PROTECT:
LED (red) indicates unit is in protection mode; the transmission of a music signal
to the connected loudspeaker is interrupted
14
VOLUME:
Rotary potentiometer for volume setting
5.1 Connection to mains power
Only connect the POWER ES to the mains power when all the other cable connections have already
been carried out.
Plug in the mains cable firstly in the inlet connector sockets of the unit and only then the earthing pin-
plug in the mains socket.
By actuating the mains power switch 1 you can turn on or turn off your unit.
5.2 Use and start-up of an analog input
