Accurist 0S10, Setting Instructions Manual

Page: 78 / 106

1. Pull the crown out to 1st. click position.
2.• Press button “B” repeatedly to set the Alarm hands to the desired alarm time.
Note: The Alarm hands move quickly if button "B" is kept pressed.
3. Push crown back to normal position. Note: The alarm is automatically engaged.
The single-time alarm cannot be set for a time more than 12 hours ahead of the current
time. While you keep button "B" pressed to advance the Alarm hands quickly, they stop
when they indicate the current time and the alarm is disengaged. In that case, release
button "B", and then, press and hold the button again to set the Alarm hands to the
desired time.
• While the crown is at the normal potition, the Alarm hands indicate the current time
when
the alarm is disengaged and the designated alarm time when it is engaged.
Note: If the Alarm hands are not adjusted to the current time, follow the procedure
in "Alarm Hand and Stopwatch Hand Position Adjustment".
76