Accurist 0S10 Setting Instructions Manual Download Page 20

Page: 20 / 106

Press the upper left button. You will see MIN on the top half of the digital display.

Press the upper right button to advance the minute hand clockwise or the lower left
button to move anti-clockwise until it is pointing straight up at the 12 O’clock
position.

Push the lower right button back in one click.

If you require technical assistance:

The following resources are available if you require technical assistance –

CDROM giving step-by-step interactive instructions is supplied with the watch.

Interactive instructions are also available from our website www.accurist.co.uk.

Technical manual in A4 printable Adobe Reader format available from our website

www.accurist.co.uk.

Accurist technical help line +44 (0)20 74473945 – during office hours.

Summary of Contents for 0S10











































































































Search results

Summary of Contents for 0S10

Reviews:

Related manuals for 0S10

Brands by name

Popular brands

Accurist 0S10, Setting Instructions Manual

Search results

Summary of Contents for 0S10

Reviews:

Related manuals for 0S10

Brands by name

Popular brands