Accurist 0S10, Setting Instructions Manual

Page: 71 / 106

Using the chronograph:
When using the chronograph begin timing
after first making sure that the chronograph
minute hand has returned to the 00 minutes
position.
If the chronograph
minute hand is
not at the 00
minutes position,
slowly press
button B until it
returns to the 00
minutes position.
69
Setting the day:
1.
Gently pull out the crown to position B.
2. Turn the crown anti-clockwise to set
the date.
* If the day is set while the time on the watch is
between the hours of about 11.00pm and
2.00am, the day may not change on the
following day.
* The day will change between
10.00pm - 12.00am
3. Once the day has finished being set
return the crown to position A.
FS80 Operating instructions continued . . .