31
Versions 1.0
Cleaning Process
For best results, the meter should be cleaned after each day of testing.
A cotton cloth can be used to clean the surface of the meter. Use a damp cotton
cloth if necessary.
A dry, soft cloth may be used to clean the LCD and the sensor area. It is
recommended that the meter be stored in the carrying case after each use.
Take care to avoid getting liquids, residue, or control solutions in the meter through
the Test Strip Holder, Code Chip Slot or USB Port.
Charging step
The meter is powered by lithium battery and can be charged by USB port.
Connecting the Micro USB port to the meter, connecting the other end to the PC's
USB port or adapter (output:5V
0.5A), can charge the meter. The meter can
not be tested when it is charging. Equipment with overcharge and over discharge
protection device
Caution:The adapter or computer should meet the requirements of current
edition of the IEC60950-1� Lithium batteries meet the standard requirements
of the IEC62133:2012
Battery Maintenance
Lithium batteries are built-in and cannot be disassembled.
• Meters should be stored in a cool, dry and safe environment.
• Avoid approaching the meter to heat source, open fire, flammable and
explosive gas and liquid, otherwise it will lead to battery leakage, heating,
smoking, ignition and explosion.
• If not used for a long time (more than a month), it is recommended to charge
40% - 60% of the battery
RFM-101 insert 20191125.indd 31
2019/11/27 10:42:07
