18
Versions 1.0
Testing with fingertip blood
Wipe away the first drop of blood. Apply light pressure to obtain a second drop of
blood. Use a capillary transfer tube or pipette to collect capillary blood.
For use with the capillary transfer tube, hold the tube slightly downward and touch
the tip of the capillary transfer tube to the blood specimen. Capillary action will
automatically draw the specimen to the fill line and stop.
Note:
The capillary transfer tube will fill automatically. Make sure the blood
covers the air vent of the tube, or it will be difficult to squeeze the blood out.
Never squeeze the capillary transfer tube while sampling.
Align the tip of the capillary transfer tube with the center hole of the Specimen
Application Area of the test strips to apply the second drop of blood.
Note:
Do not touch the test strip with the capillary transfer tube or pipette. The
capillary blood should be tested immediately after collected. Use of a capillary
transfer tube or pipette is recommended for accurate results.
Blood specimens can be obtained by using a lancing device or a safety lancet.
Note:
Please use the safety lancet.
Lancing Device
RFM-101 insert 20191125.indd 18
2019/11/27 10:42:06
