6
CAUTION
WARNINGS AND PRECAUTIONS REGARDING THE PADS
• Do not bend or fold because the pad may not function properly.
Place the pads onto the plastic film and then store into the sealed
package when not in use.
• Do not apply ointment or any solvent to the pads or to your skin
because it will disrupt the pads from functioning properly.
• The pads are already pre-gelled and will adhere to your skin.
• To avoid damage to the adhesive surface of the pads, put the pads
only on the skin or on the plastic film provided.
• Place the pads at least 1 ½” apart on your skin. The pads should
never touch each other.
• Always place clean pads in accordance with illustrations provided
(Refer to page 20).
• Make sure the components are connected well and the pads are
fixed on the part of the body you wish to treat or the therapy may
not be effective.
DO NOT USE YOUR PADS THIS WAY
• Pads should not be placed simultaneously on the calves of
both legs.
Pads should not touch each other when placed onto your skin.
• Do not place on your spine or backbone.
• Pad should not touch any metal object, such as a belt buckle or
necklace.
• Do not share pads with another person. This may cause a skin
irritation or infection. Pads are intended for use by one person.
• Do not place or relocate the pads while the device is on.
• Always turn the power off before removing or changing the pad
location.
• Do not leave pads attached to the skin after treatment.
CAUTION WHILE USING THE STIMULATOR
• If the stimulator is not functioning properly or you feel discomfort,
immediately stop using the device.
• Do not use for any other purpose except for what it is intended for.
• Do not insert the electrode plug into any place other than the jack on
the main unit.
• Do not mix Alkaline and Rechargeable/Alkaline batteries as this will
shorten the battery life.
• Do not pull on the electrode cord during treatment.
• Do not use the device while wearing electronic devices such as
watches as this may damage the device.
• Do not use near a cell phone as this may cause the stimulator to
malfunction.
• Do not bend or pull the end of the cord.
• When pulling out the cord from the device, hold the plug and pull.