background image

15

Step 6 - Start treatment and adjust 

intensity

Using either the remote control or buttons on 

the device, press the -/+ [    ] button to set the 

intensity level. The treatment will begin and the 

[     ] display will start counting down the 

remaining minutes of treatment.

• Each person may require a different 

intensity level to obtain the optimal muscle 

stimulation. The device can safely be used 

on intensity level 1 to maximum level of 99. 

If the stimulation levels are uncomfortable 

or become uncomfortable, reduce the 

stimulation intensity to a comfortable level 

and contact your medical practitioner if 

problems persist.

• For safety purposes, this device was 

designed with load detection. If the electrode 

pads are removed from the skin, an alarm 

buzzer will sound and the intensity value will 

return to zero automatically.

Combination of Foot and Body Stimulation

You can use Foot and Body Stimulation at the same time or individually. 

Step 7 - Turn OFF the device

To turn OFF the device. Press the power button 

[       ] on the device or the remote control. The 

display also has an automatic shut-off once the 

timer reaches zero.

CAUTION

POWER

x10000

x100

COUNTER

POWER

x10000

x100

COUNTER

Summary of Contents for ACRL5500

































Reviews: