AccuEnergy AcuDC 240 Series, User Manual

Page: 37 / 59

37
9 th screen: RO2 alarm parameter when RO is set as Alarm
mode. 0, no alarm; 1, voltage; 2, current; 3, power. Press "F"
key to select. Press “V/A” to confirm and go to the next screen.
10
th
screen: RO2 alarm inequality setting. 1, larger than; 0,
smaller than. Press "F" key to select. Press “V/A” to confirm and
go to the next screen.
11
th
screen: RO2 alarm threshold setting. The threshold
setting range is the same as the measurement range. Voltage:
0-1200,Current: 0-50000,Power 0-60000. Press "F” and “V/A”
to edit the vaule. Press “V/A" to confirm and go to the next
screen.
Figure 3-36 RO2 alarm parameter setting
Figure 3-37 RO2 alarm inequality setting
Figure
3-38
RO2 alarm threshold setting
www. .com
information@itm.com 1.800.561.8187