7
2. Getting Started
2.1 Installation
Select an appropriate workspace that is clean, flat, and leveled. The
equipment should never be placed near strong sources of light, heat sources,
or air conditioners. Please do not install the equipment where its weight
cannot be supported.
Plug the power cable to the back of the bill counter and into the wall power
outlet. Turn the equipment on.
2.2 Bill Guider Installation
Proceed to install them as follows:
1.
Align the guider with the latch
mechanism in the bill counter.
2.
Insert the guider into the latch until a
“click” sound is heard. This means the
guider has locked into place.
3.
Repeat this process with the other
guider.
4.
To remove the guider, push it while
pulling it out from the latching
mechanism.
