background image

 

 

1. Safety Instructions (continued) 

 

 

Follow all warnings and instructions marked on the unit. 

 

This product is meant to be operated in an indoor environment with 

proper ventilation. 

 

Do not place near direct sunlight, heat sources, or air conditioners. 

 

This product should only be operated with the power cord supplied and 

the type of power source indicated in this user guide. If you are not sure 

of the type of power supply in your location, consult your vendor or local 

power company. 

 

To avoid the risk of fire or electric shock, never push objects into the unit 

through the case slots or openings, since they may touch dangerous 

voltage points or shortcut parts. Do not disassemble the unit. 

 

Never spill liquids of any kind on the product. 

 

Unplug this product from the wall outlet and refer servicing to qualified 

service personnel under the following conditions: 

When the power supply cord or plug is damaged or frayed* 

If liquid has been spilled into the unit, or it has been exposed to rain 

or water* 

If the product has been dropped or the case has been damaged* 

If the product shows a noticeable change in performance 

 

*Not covered under warranty 

 

NOTE:

 Do not remove the "ground" prong from the power cord. It is a safety 

feature meant to protect the user from harm and the equipment from damage. 

 

If the unit does not operate normally while following the 

instructions, adjust only those controls covered by the operating 

instructions. Improper adjustment of other controls may result in 

damage and will often require extensive work by a qualified 

technician to restore the product to normal operation. 

 

Summary of Contents for AB5800





















Reviews: