13
2. Equipment Overview (continued)
2.2 Control Panel Description (continued)
•
UV:
Ultraviolet Verification On/Off
This function allows the unit to analyze the ultraviolet characteristics of
each bill during the counting. The unit will stop counting if a bill is
considered suspicious. The UV sensitivity can be adjusted by the user
from 1-9.
•
DD:
Bill Size Verification (Width) On/Off
The unit will “memorize” the width of the first bill scanned and will
compare the rest with it. The unit will stop counting if a bill with a
different size is detected. The DD sensitivity can be adjusted by the user
from 1-9.
**This function is only applicable for those currencies that have a
different width/size for every denomination, like EURO**
**It is highly recommended to activate DD when counting
POLYMER bills like CAD or MXN**
•
LEVEL:
Allows the adjustment of the emission intensity of the counting
sensors. It can be adjusted from 1-9.
•
C key:
Clear counting data / go out of Value Extension mode.
Used to clear (delete) the counted data from the display.
Press C twice to go out from the Value Extension mode and go back to
the standard counting mode.
•
BATCH:
Preset batches selection
By pressing the BATCH sequentially, the preset batch value will change
among 5, 10, 25, 50, 100, 200, or Off.
•
START:
While in SHOW mode, START is used to go back to the
counting screen. While in MANUAL mode, START is used to start or
stop the counting operation. START is used also to accept and confirm
batch selection as well as security functions sensitivities.
