17
4. Operation (continued)
4.3 Thickness Knob Adjustment (Feeding Gap)
Proceed with this calibration when the bills are not fed smoothly through the
machine or miscounting errors are occurring frequently.
Other reasons that might require readjusting the feeding gap are:
-
The counting of new or mint condition bills
-
The counting of poor or bad fitness condition bills
Having the correct thickness adjustment knob positioning will ensure a
smooth counting as well as a trouble-free unit’s operation.
Trial and error attempts are recommended before you make the final
adjustment.
a.
for new (thinner) notes, adjust toward “-” to reduce the gap
b.
for used (thicker) notes, adjust toward “+” to increase the gap
c.
small adjustment toward “+” direction works best
d.
polymer bills might require to reduce the gap for ensuring a good
counting result
-
Reduce thickness gap
rotates knob toward “-”
0
+
Increase thickness gap
rotates knob toward “+”
4.4 Emergency Stop button
The emergency stop button stops the unit operation immediately in case any
incident occurs. The unit requires to be turned OFF and ON again to resume
the counting operation.
Be aware to not press the Emergency button by accident during the normal
operation with the unit.
