Airlock, blower support bar, and blower connector hose
Figure 8
5)
Remove the (2) bolts that hold airlock to front of the machine.
6)
Remove the (8) screws holding the airlock to the bottom of the
hopper.
7)
Remove blower connector hose (black) from airlock inlet located on
the square tube behind the airlock sprocket.
8)
Remove blower support bar and blower and set both aside.
9)
Use a flat screwdriver to pry the airlock off the 9300 cabinet. There
will be silicone caulk bead between the airlock and the hopper.
10)
Lift up on the back of airlock and remove the airlock from unit setting
it on a flat surface.
Airlock shell, front (with 3" tube)plate and back plate, rotor, and seals
Figure 9
11)
Remove the rubber seals from the airlock rotor.
13
