24)
Reinstall seals so the thicker side (or side without seams) of the seals
touch the airlock shell.
25)
Apply a thread penetrant like WD40 to the outside of the seals.
26)
Using a pipe wrench on the sprocket, turn the rotor and seals.
27)
Use a flat screwdriver to cup seals on edges.
Airlock housing and shredder
Figure 12
28)
Scrape old silicone off airlock and housing. Reinstall airlock the same
way as it was removed.
29)
Put bolts back and tighten.
30)
Replace blower support bar and blower and tighten.
31)
Replace the sprocket and chain and line up chain tighten sprocket
and chain and tensioner.
32)
Flip machine back over making sure everything is tight and secure.
33)
Be sure to replace agitator paddles if worn will reduce production.
15
