EXM-150 MICROSCOPE SERIES
ACCU-SCOPE
®
73 Mall Drive,
Commack, NY 11725 • 631-864-1000 • www.accu-scope.com
7
ADJUSTMENT & OPERATION
(continued)
Placing the Specimen Slide
For Models With a Fixed Stage
Place the slide on the stage with the cover glass facing up and
secure it with the stage clips
①
.
For Models With a Mechanical Stage
Push the slide finger
②
of the specimen holder towards the
back to open it and place a specimen slide into the slide
holder with the cover glass facing up. Release the slide finger
so it closes and secures the slide in place.
Rotate the X and Y-axis knobs
③
to move the slide into
position.
Adjusting the Focus
Turn the coarse adjustment knob
④
counterclockwise to
move the stage to its lowest position.
Place a specimen slide on the center of the stage.
Using the 4x objective bring the specimen into focus using the
coarse
④
and fine
⑤
focusing controls.
Different objectives can be brought into view by rotating the
nosepiece and using the fine adjustment knob because the
objectives are parfocal.
①
②
③
④
⑤
