Accu-Chek Compact Plus, Owner'S Booklet

Page: 60 / 100

Chapter 3: Testing Your Blood Sugar 58
ACCU-CHEK Customer Care Service Center 1-800-858-8072
Notes:
• Hold the meter so the test strip points downward. Do not bend the test strip.
• Do not apply blood to the top of the test strip.
• Do not flood the test strip with blood. Only a small drop of blood is required.
• When you install a new test drum, a dot appears in the test strip count window on the back of the
meter. This means the test drum is ready for a test. The meter counts down the remaining test strips
after each test. By looking at the test strip count window, you can see how many test strips you have
left to use.
• When a test drum is empty, the dot reappears in the test strip count window on the back of the
meter. “End” and the test drum symbol flash on the display.
• Do not open the test drum door when the motor is running.
• If you do not turn off the meter after a test, the meter turns off automatically after about 60 seconds.
The test strip then remains in the meter. When you slide and release to turn on the meter, it
simply releases the test strip and turns itself off again.
• Always let the meter release the test strip. If you pull out a used test strip, blood can enter the meter
and contaminate it.
• Never push any test strip back into the meter or the test drum. These test strips can produce
incorrect results.