Accu-Chek ADVANTAGE User Manual Download Page 19

Page: 19 / 90

5. Press and release the ON/OFF button. The hour

display flashes.

6. Press and release the right or left arrow button until

the correct hour is displayed.

7. Press and release the ON/OFF button. The minute

display flashes.

8. Press and release the right or left arrow button until

the correct minute is displayed.

9. Press and release the ON/OFF button. The month

display flashes.

10. Press and release the right or left arrow button until

the correct month is displayed.

11. Press and release the ON/OFF button. The day

display flashes.

12. Press and release the right or left arrow button until

the correct day is displayed.

13. Press and release the ON/OFF button. The year

display flashes.

14. Press and release the right or left arrow button until

the correct year is displayed.

15. To leave this function, press and hold down the

ON/OFF button until the flashing test strip symbol or
code and “---” are displayed.

Note: You may leave the set mode at any time
by pressing and holding the ON/OFF button. The
settings you have entered are saved.

Summary of Contents for ADVANTAGE



























































































Search results

Summary of Contents for ADVANTAGE

Reviews:

Related manuals for ADVANTAGE

Brands by name

Popular brands

Accu-Chek ADVANTAGE, User Manual

Search results

Summary of Contents for ADVANTAGE

Reviews:

Related manuals for ADVANTAGE

Brands by name

Popular brands