7
ARAID Setup
(1)
Disconnect the computer power source and take off the cover of computer case.
(2)
Setup RAID 1 / RAID 0 mode (Jumper).
(3)
Install ARAID M500 into computer case where for 5.25” bay position and fix it with
screws.
(4)
*
Connect with COM Port
1. Connect the 3-pin of RS232 Internal Cable to R1 port of ARAID M500’s rear panel,
and connect the 4-pin of RS232 Internal Cable to UR1 port of ARAID M500’s rear
panel.
2. Screw the other head of RS232 Internal Cable at the rear panel of computer case.
3. For the COM Port, which can connect with either physical RS-232 port or USB port.
*
Connect with physical RS-232 Port
Connect the RS232 External Cable (white) with (1) the physical RS232 port of computer
and (2) the RS232 port of RS232 Internal Cable.
(5) Connecting SATA cable, and power cable.
(6) Put the computer case back to its position.
*
Connect the simulated RS-232 through a USB port
Connect the RS232 to USB Cable (black) with (1) the USB port of computer and (2) the
RS232 port of RS232 Internal Cable.
If your computer’s physical COM port is built-in to the motherboard,
please purchase your own COM port cable or use USB port for
simulated RS-232.
Install the driver of Windows/Linux which includes in the CD.
*
Hardware Installation
Caution
Caution
Table 4: Hardware Installation Steps