18
User's Manual
disk automatic rebuilding function will begin (if the rebuilding isn’t executed, shift the
Panel Switch from
“Single” to “Dual” and the HDD TYPE under BIOS should still set at
“AUTO”).
Q: What is the procedure if an incompatibility exists with my equipment or operating
system when using an ARAID
product?
A. If the customer encounters any incompatible scenario, please contact us and we will help
you solve the problem.
Q: When turn off the buzzer of M500, why it can’t be stop(close) immediately?
A. This is firmware design purpose, so it’s a normal condition.
＊
＊
Incompatibility of the ARAID with my existing equipment/operating system:
Buzzer Alarm
Be sure to insert the smaller capacity hard disk into the upper bay
and the bigger capacity hard disk into
the lower bay, and they should
not be wrongly inserted.
Do not mix SATA I (1.5 Gbps), SATA II (3 Gbps) and SATA III (6.0
Gbps) hard disks in the ARAID to
avoid affecting the efficiency.
We recommend tag a sticker on the panel of the tray for ease of
identifying the brand, capacity and
model number of the hard disk.
Caution
Caution
Caution
