11
I N S T A L L A T I O N
POWERING ON THE PROJECTOR
1
Remove the lens cap.
2
Ensure that the power cord and signal cable are
securely connected. The Power LED will flash green.
3
Turn on the lamp by pressing “Power/Standby”
button on the control panel.
And the Power LED
will turn green.
The first time you use the projector, you can select
your preferred language from the quick menu after
the start-up screen display.
4
Turn on your source (computer, notebook, video
player, etc.). The projector will detect your source
automatically.
1
Turn on the projector
first and then the
signal sources.
If you connect multiple
sources at the same
time, use the “Source”
button on the remote
control or control
panel to switch
between them.
If the screen displays
“No Signal”, please
make sure the signal
cables are securely
connected.
1
