Hitachi CP-X443 series User Manual – Operating Manual Download

Page: 1 / 55

Projector

CP-X443

User Manual – Operating Guide

Thank you for purchasing this projector.

WARNING

►Before using, read the "User's Manual - Safety Guide" and

these manuals to ensure correct usage through understanding. After reading,

store them in a safe place for future reference.

About this manual

Various symbols are used in this manual. The meanings of these symbols are

described below.

WARNING

This symbol indicates information that , if ignored, could possibly

result in personal injury or even death due to incorrect handling.

CAUTION

This symbol indicates information that , if ignored, could result

possibly in personal injury or physical damage due to incorrect

handling.



Please refer to the pages written following this symbol.

NOTE

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in this manual.

• The reproduction, transmission or use of this document or contents is not permitted without

express written authority.

Trademark acknowledgment

• VGA and XGA are registered trademarks of the International Business Machines

Corporation.

• Apple and Mac are registered trademarks of the Apple Computer, Inc.

• VESA and SVGA are trademarks of the Video Electronics Standard Association.

• Windows is a registered trademark of the Microsoft Corporation.

• Internet Explorer is a trademark of the Microsoft Corporation.

• Netscape is a registered trademark of the Netscape Communications Corporation.

All other trademarks are the property of their respective owners.

Summary of Contents for CP-X443 series
























































Search results

Summary of Contents for CP-X443 series

Reviews:

Related manuals for CP-X443 series

Brands by name

Popular brands

Hitachi CP-X443 series, User Manual – Operating Manual

Search results

Summary of Contents for CP-X443 series

Reviews:

Related manuals for CP-X443 series

Brands by name

Popular brands