26
A P P E N D I C E S
PROBLEM:
The screen of the Notebook or PowerBook
computeris not displaying your presentation.
n
If you are using a Notebook PC:
Some Notebook PCs may deactivate their screens when a second
display device is in use. Refer to your computer’s documentation
for information on how to reactivate the monitor display.
n
If you are using an Apple PowerBook
:
In Control Panels, open the PowerBook Display to
select Video Mirroring “On”.
PROBLEM
Image is unstable or flickering
n
Use “Tracking” to correct it. Refer to page 20.
n
Change the monitor color setting from your computer.
PROBLEM
Image has vertical flickering bar
n
Use “Frequency” to make an adjustment. Refer to page 20.
n
Check and reconfigure the display mode of your graphic card to
make it compatible with the product. Refer to page 30.
PROBLEM
Image is out of focus
n
Adjusts the Focus Ring on the projector lens. Refer to page 14.
n
Make sure the projection screen is between the required
distance 1.2 to 10.0 meters from the projector.
PROBLEM
The image is outstretched when displaying 16:9 DVD
The projector automatically detects 16:9 DVD and adjusts the aspect
ratio by digitizing to full screen with 4:3 default setting.
If the image is still outstretched, you will also need to adjust the aspect
ratio by referring to the following:
n
Please select 4:3 aspect ratio type on your DVD player if you are
playing a 16:9 DVD.
n
If you can’t select 4:3 aspect ratio type on your DVD player, please
select 4:3 aspect ratio in the on screen menu.
PROBLEM
Image is reversed
n
Select “Management” from the OSD and adjust the projection direction. See
page 23.
PROBLEM
Lamp burns out or makes a popping sound
n
When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the projector will not
turn on until the lamp module has been replaced. To replace the
lamp, follow the procedures in the “Replacing the Lamp” section. See page 28.
