18
GB
WIRE BINDER G1
F. Element Closing:
A properly closed element is circular. It allows the pages to turn without
restricting the paper, while not allowing sheets to fall out of the binding.
Above is a diagram of a correctly closed element. The element is
considered under-closed if it is possible to pull a sheet out of the twin
loop binding by pulling on the end of the sheet. The element is
considered over-closed if the element is oval shaped. If the element is
under-closed increase the closer value in the LCD tree, decrease this
value instead if the element is over-closed. After changing the setting
run a new book and inspect its element.
10. SUPPLY INFORMATION
A. Supply Order Information
Twin loop wire supply for the BINDER G1 machine comes in 5 different
sizes and 3 different colors. In order to switch between size and colors
of twin loop wire, follow the instructions in Section 4. To re-order or
order new wire supply, refer to the table below.
Description
Reorder Number
eWire Spool, Element Size 'A', Black
7717962
eWire Spool, Element Size 'B', Black
7717963
eWire Spool, Element Size 'C', Black
7717964
eWire Spool, Element Size 'D', Black
7717965
eWire Spool, Element Size 'E', Black
7717966
eWire Spool, Element Size 'A', White
7717968
eWire Spool, Element Size 'B', White
7717969
eWire Spool, Element Size 'C', White
7717970
eWire Spool, Element Size 'D', White
7717971
eWire Spool, Element Size 'E', White
7717972
eWire Spool, Element Size 'A', Silver
7717974
eWire Spool, Element Size 'B', Silver
7717975
eWire Spool, Element Size 'C', Silver
7717976
eWire Spool, Element Size 'D', Silver
7717977
eWire Spool, Element Size 'E', Silver
7717978
Die Set Part Numbers:
Die, eWire, 3:1, Round
7714915
Die, eWire, 3:1, Square
7714916
Die Set Description:
Square Hole Die:
eWire; Square; 3 Holes per inch; Hole Size: 5mm x 5mm (0.197" x 0.197") (L x W); Center-to-Center Hole Spacing:
8.5mm (0.333")
Round Hole Die:
eWire; Round; 3 Holes per inch; Hole Size: 5.5mm (0.217") Diameter; Center-to-Center Hole Spacing: 8.5mm (0.335")
B. Book Capacity Information
Element
Size
Sheet
Capacity*
(75 gsm)
Max.
Document
Thickness
(mm)
Max Books Per
Spool
†
Letter
A4
A
15-30
3
515
485
B
31-50
5
320
300
C
51-60
6
250
235
D
61-70
7
180
170
E
71-80
8
130
120
*Sheet capacity based on 20lb (75 gsm) paper. Subtract 10 sheets
(1mm) to accommodate covers.
†
Max books per spool is the greatest number of books a spool can
produce if none is wasted during operation or set up.
1
34-A4
32-LTR
1
34-A4
32-LTR
Summary of Contents for GBC G1
