Acclaim Lighting Linear One DMX Exterior, User Manual

Page: 10 / 28

8
www.acclaimlighting.com
REMOVING AND REFITTING THE END PANELS
Several alterations to the Linear One fixture begin with the removal of the end panels. There
are just four screws holding each end panel in place and these require a medium sized Pozi-
Drive (Philips) screwdriver.
Please note that removing the end panels in no way affects the integrity of the IP66 rating
and there should be no fear of water infiltration in performing this task.
TO REMOVE THE END PANELS
1 Using a medium sized Pozi-Drive (Philips) screwdriver, remove the four screws and store
safely for refitting.
2 Remove the end panel.
3 Repeat for the other end panel.
TO REFIT THE END PANELS
1 Position an end panel onto the fixture, ensuring that the countersinks of the four holes are
facing outwards.
2 Insert the four screws and tighten them using a medium sized Pozi-Drive (Philips)
screwdriver.
3 Repeat for the other end panel.
End panel