Acclaim Lighting Linear One DMX Exterior, User Manual

Page: 7 / 28

5
www.acclaimlighting.com
INSTALLATION
When installing each Linear One fixture, ensure that the surface is level and that nothing is
protruding to damage the mounting bracket(s). Suitable mounting surfaces include steel,
aluminum, concrete or wood structures.
Each Linear One fixture is fitted with two swivel mounting brackets, each of which have
two slots measuring 0.26” x 0.18” (6.5 x 4.5mm), with a base thickness of 0.12” (3mm). Select
bolts or screws (not supplied) that fit the swivel mounting brackets correctly and are
particularly suited to the mounting surface. Optional mounting tracks (see page 6) and
flat mounting brackets (factory fitted option) are also available.
MOUNT ADJUSTMENT
The swivel mounting brackets allow a tilt range of approximately 90 degrees to be achieved.
Use a 0.12” (3mm) Allen wrench to adjust the tilt angle.
Ensure that each swivel mounting bracket is securely fixed to the mounting surface with
appropriate screws/bolts. If necessary, use a 2mm Allen wrench to loosen the two grub
screws on each swivel mounting bracket to allow them to slide along the length of the
fixture to the required position before re-tightening.
Tilt adjustment
(3mm Allen wrench required)
Slide adjustment (x2)
(2mm Allen wrench required)