Acclaim Lighting Linear One DMX Exterior, User Manual

Page: 14 / 28

12
www.acclaimlighting.com
INTERCONNECTING
Each Linear One DMX fixture has a short cabled
control/power input connector at one end and
an integral control/power output at the other.
When fixtures are daisy-chained (end to end), the
input plug of one fixture can connect directly to
the output socket of the previous fixture.
Alternatively, where fixtures are not in
a daisy chain, one of the optional
link cables can be used to
space any two fixtures.
When mounting Linear One fixtures in a 90 degree corner-to-corner arrangement, do not
attempt to interconnect them using only the cabled control/power input plug as it is not
long enough to reach. Always use a 6” (15cm) link cable [Part#: LNLC0] - or longer, if the
spacing is greater.
IMPORTANT: Do not exceed the
stated maximum fixtures in a daisy
chain. See”Maximum number of
Linear One fixtures” on page 11.
Cabled power
input plug
Integral power
output socket