20
www.acclaimlighting.com
LINEAR ONE DMX EXTERIO...
002:
STD.FASTCOLORON
001:
STD.BLACKOUT
003:
STD.LASTRECEIVED
004 CH
LINEAR ONE DMX EXTERIOR
MODEL:LINEAR ONE DMX EXTERI...
MAN:
DMX START ADDRESS:
DMX SLOTS:
ACCLAIM LIGHTING
001
4
LABEL: LINEAR ONE DMX EXTERI...
DMX PERSONALITY:STD.BLACKOU...
SETTING THE SIGNAL LOSS BEHAVIOR
You can choose how the fixture should respond to a loss of the control signal, the options
are:
•
Blackout
- if the DMX signal is lost then blackout all emitters until the signal is re-
established.
•
Fast color on
- allows you to set a constant color/intensity output that will be shown
whenever a DMX signal is not present. Useful when installing isolated fixtures.
•
Last received
- if the DMX signal is lost then keep displaying the instructions that were
last received, until the signal is re-established.
TO SET THE SIGNAL LOSS BEHAVIOR USING THE XMT-350
Note: If you are setting the
Fast Color On
mode, first use your XMT-350 in Send mode to apply a
desired color/intensity mix to the fixture before switching to RDM mode.
1 Connect the XMT-350 to the DMX input line of the Linear One installation.
2 On the XMT-350, press the
MODE
button, then use the arrow buttons to highlight the
RDM
function and press the button to select. The XMT-350 will search for RDM devices
and after a short while the XMT-350 will display a list of all located fixtures. The fixture
highlighted in the list should show output from its emitters to identify itself.
3 If necessary, use the up/down buttons to highlight an alternative fixture.
4 Press the button to view details for the chosen fixture and then use the down button
to highlight the
DMX PERSONALITY
entry:
5 Press the button to view the options:
6 Highlight the required signal loss behavior mode (4’ models offer STD or EXD options):
•
BLACKOUT - will blackout all emitters until the signal is restored.
•
FASTCOLORON - choosing this item will fix in memory the color/intensity mix that is
currently showing on the fixture (as directed by your XMT-350 while in Send mode).
This will be shown by the fixture whenever the control signal is not detected.
•
LASTRECEIVED - will keep displaying the last received DMX instructions until the control
signal is restored.
7 Press the button to fix the highlighted choice.
8 Press the button to return to the previous screen.
LINEAR ONE DMX EXTERIO...
002:
STD.FASTCOLORON
001:
STD.BLACKOUT
003:
STD.LASTRECEIVED
005:
EXD.FASTCOLORON
004:
EXD.BLACKOUT
006:
EXD.LASTRECEIVED
016 CH
<
1’ models
4’ models
>
Summary of Contents for Linear One DMX Exterior
Page 1: ...Linear One DMX Exterior User guide...
Page 2: ......
Page 27: ......
Page 28: ...www acclaimlighting com...
