6
Release retainer straps at front
and using both hands roll cover
out to rear of box.
Now along side of box, seal cover
edges with hook and loop sealing
system the full length of cover on
both sides. Pull with one hand -
seal with other hand.
Position roll-up bar against
strikes. Push down on bar until
autolatch locks in place.
Open tailgate on driver side
release trigger latch and lift up
on rear of roll bar.
Securely fasten retainer straps to
store the cover.
Using both hands, roll cover
toward front of box (not against
the cab).
OPERATING INSTRUCTIONS
TO OPEN
Note: view opening and closing demonstration video on www.vanishcover.com
Manual Slide Lock (use is optional) is
located under cover bar on passenger and
driver side - push slide lock to engage, pull
to disengage.
OPTIONAL USE
• Always keep cover closed when not in use.
• Keep hook and loop sealed when cover is closed.
• Keep the cover tight, cover vinyl should sound drum-like when tapped on.
• Engage manually operated slide locks while traveling and before entering automatic drive-through car washes.
• Avoid storing cover in its rolled-up position for long periods of time.
• When cleaning, for best results use mild liquid soap and water. Never clean with petroleum or citrus base products.
• Periodically treat cover with our Formula 2 cleaner instead of petroleum based products that may dry out and
damage the vinyl.
• Avoid allowing cargo to rub against cover while transporting, whether in open or closed position.
TIPS FOR A LONGER LASTING COVER