Accent 800 User’s Guide: NuVoice
20
Attaching the New Frame
You must attach the device frame before you can mount a keyguard or TouchGuide over the screen.
1.
Press one side of the frame onto the edge of
the device.
2.
Pull the other side into place.
Note:
The top tabs and/or bottom tab may snap
into place as you pull on the side.
Note:
You can start with either the left side or
the right side.
3.
If necessary, pull the top tabs into place.
4.
If necessary, pull the bottom tab into place.
5.
Look along the inside edge of the frame along the top, bottom, and sides to make sure the rubber
backing didn’t bunch up between the frame and the edge of the device. In this example, the rubber
is bunched up, leaving a gap between the frame and the edge of the device.
If necessary, lift up the inside edge slightly and press until the rubber backing fits smoothly between
the frame and device.
6.
To secure the frame to the device with screws, proceed to the next section, “Attaching the Frame