Accent 800 User’s Guide: NuVoice
19
Removing or Replacing the Device Frame
Your device came with a frame mounted on it. If you need to remove or replace the frame, follow these
instructions.
Removing the Frame
1.
If you are using a keyguard or TouchGuide, remove it from the frame. See “Removing the Keyguard”
on page 23 or “Removing the TouchGuide” on page 24.
2.
Using a Phillips screwdriver, remove the four
screws that secure the frame to the device—two on
top and one on each side.
3.
Grasp one side of the frame and pull it loose
from the device.
Important!
Store these screws in a safe location in
case you later decide to reattach the frame.
Loose screws could be a choking hazard.
Hint:
You may want to use a flat-head
screwdriver or similar tool to gently lift
the side and bottom tab on the back of
the device.
4.
Grasp the other side of the frame and pull it
loose from the device.
5.
Pull the tabs on the top of the frame out of
the slots on the device.
6.
Pull the tab on the bottom of the frame out of
the slot on the device.
7.
Proceed to the next section, “Attaching the
Screws
Note:
When you pull
the other side loose,
the top or bottom
tabs (steps 5 and 6)
may pull out at the
same time.