background image

Make sure to 

remove

 the 

spout extender from the 

Orbit spout and 

place

 the 

dosing cup on the Lunar.

To begin the grinding 

session, 

click

 the Orbit 

button. The Orbit will start 

grinding until the target 

weight is reached.

At the end of each 

session, you can click the 

Orbit button to pulse a 

small amount of coffee if 

needed.

Remove

 the dosing cup 

or 

double tap

      to reset 

the current grind-by-

weight session.

When the target weight 

is reached, the Orbit will 

automatically stop the motor. 

Note: In Grind-By-Weight mode, when 

the grinder detects no coffee in the 

chute, it automatically stops after 60 

seconds.

Adjusting Weight and RPM in Grind-by-weight Mode

24

To adjust the target weight 

and RPM, 

press and hold

     

      until the weight starts 

blinking.

When you reach the 

desired target weight, 

wait 

5 seconds

 to move on to 

the RPM adjustment.

When the weight starts 

blinking, 

tap

      to increase 

and 

tap

      to decrease.

When adjusting target 

weight and RPM, 

press and 

hold

      /      to speed up 

the adjustment.

When the RPM starts 

blinking, 

tap

      to increase 

and 

tap

      to decrease.

When you reach the 

desired RPM, 

wait 5 

seconds

 to save.

1

4

7

10

11

2

5

8

3

6

9

Summary of Contents for AOT007






























Reviews: