2
1. On/Off Button
Press this button can turn on or turn off the air conditioner. After turning on the air conditioner, operation
indicator “ “ on indoor unit’s diplay is ON (green indicator. The colour is different for different models), and indoor unit will
give out a sound.
2. Mode Button
Press this button to select your required operation mode.
3. FAN Button
Pressing this button can set fan speed circularly as: auto (auto), Low ( ), medium ( ), high ( ).
4. SWING Button
Press this button will select up or down swing angles. Fan blow angle can be selected circularly as seen below.
5. TURBO Button
Under COOL or HEAT mode, press this button to turn to quick COOL or quick HEAT mode. " " icon is displayed on remote
controller. Press this button again to exit turbo function and " " icon will dissapear.
6.
▲
/
▼
Buttons
Press "
▲
" or "
▼
" button once increase or decrease set temperature 1C (33.8F). Holding "
▲
" or "
▼
" button, 2s later, set
temperature on remote controller will change quickly. On releasing button after setting is finished, temperature indicator on
indoor unit will change accordingly. (Temperature can't be adjusted under auto mode)
When setting TIMER ON, TIMER OFF or CLOCK, press "
▲
"
or "▼" button to adjust time. (Refer to CLOCK, TIMER ON,
TIMER OFF buttons) When setting TIMER ON, TIMER OFF or CLOCK, press "▲" or "▼" button to adjust time. (Refer to
CLOCK, TIMER ON, TIMER OFF buttons)
Caution:
Under Auto speed, air conditioner will select proper fan speed automatically according to ex-factory setting.
Fan Speed under dry mode is low speed.
When selecting auto mode, air conditioner will operate automatically according to ex-factory setting. Set temperature can’t
be adjusted and will not be displayed as well. Press “FAN” button can adjust fan speed. Press “SWING” button can adjust fan
blowing angle.
After Selecting cool mode, air conditioner will operate under cool mode. Cool indicator “ “ on indoor unit is ON. Press
“
▲
“ or “
▼
“ button to adjust the temperature. Press “FAN” button to adjust fan speed. Press “SWING” button to adjust fan
blowing angle
When selecting dry mode, the air conditioner operates at low speed under dry mode. Dry indicator “ “ on indoor unit is
ON. Under dry mode, fan speed can’t be adjusted. Press “SWING” button to adjust fan blowing angle.
When selecting fan mode, the air conditioner will only blow fan, no cooling and no heating, All indicators are OFF. Press
“FAN” button to adjust fan speed. Press “SWING” button to adjust fan blowing angle.
When selecting heating mode, the air conditioner operates under heat mode. Heat indicator “ “ on indoor unit is ON.
Press “
▲
“ or “
▼
“ button to adjust set temperature. Press “FAN” button to adjust fan speed. Press “SWING” button to adjust
fan blowing angle. (Cooling only unit won’t receive heating mode signal. If setting heat mode with remote controller, press
ON/OFF button can’t start up the unit).
Note:
For preventing cold air, after starting up heating mode, indoor unit will delay 1-5 minutes to blow air (delay time is depen-
dant on indoor ambiet temperature).
Set temperature range from remote controller. 16~30C (60.8~86F); Fan speed: auto, low, medium, high speed.
When selecting " ", air conditioner is blowing fan automatically. Horizontal louver will automatically swing up & down at maximum angle.
When selecting "
", air conditioner is blowingfan at fixed positions. Horizontal louver will stop at the fixed position.
When selecting "
", air conditioner is blowing fan at fixed angles. Horizontal louver will send air at the fixed angle.
Hold " " button above 2s to set your required swing angle. When reaching your required angle, release the button.
Note:
"
" may not be available. When air conditioner receives this signal, the air conditioner will blow automatically.
Summary of Contents for AWH30LB-D3DNA3D/I
Page 2: ......
