Technical Information
ƲƳ
No.
Symbols
Description
11
Lock function
12
SHEILD
Shield functions (Button operation, temperature setting, On/Off operation,Mode setting are disabled by the
remote monitoring system.)
13
TURBO
Turbo function state
14
MEMORY
Memory function (The indoor unit resumes the original setting after power failure and power recovery)
15
It blinks while on
16
SAVE
Energy-saving function
17
Ambient/setting temperature value
18
E-HEATER
Electric auxiliary heating function
19
BLOW
Blow function
20
Time value
21
QUIET
Quiet function (two types: quiet and auto quiet)
2 Buttons
2.1 Layout of Buttons
No.
Name
Description
1
Enter/Cancel
Function selection and cancellation.
2
S
Running temperature setting of the indoor unit, range:16~30°C
6
T
Timer setting, range:0.5-24 hr.
3
Fan
Setting of the high/middle/low/auto fan speed.
4
Mode
Setting of the Cooling/Heating/Fan/Dry/Auto mode of the indoor unit.
6
Function
Switchover among the functions of Turbo/Save/E-heater/Blow etc.
7
Timer
Timer setting.
8
On/Off
Turn on/off the indoor unit.
4+2
S
+Mode
Press for 5s under to enter/cancel the Memory function(If memory is set, indoor unit power failure and
power recovery will resume in the original setting state. If not, the indoor unit is defaulted to off after power
recovery. Memory off is default before delivery.).
3+6
Fan+
T
By pressing them at the same time while off, will be displayed on the wired controller for the cooling only
unit, while will be displayed on the wired controller for the cooling and heating unit.
2+6
S
+
T
Upon startup, press them at the same time for 5s to enter the lock state. Repress them for 5s to quit.
