AC Pro AWH09QB-A3DNA5K/O Service Manual Download

Page: 39 / 42

Technical Information

.2 REMOVAL PROCEDURE OF OUTDOOR UNIT

Step

Procedure

1. Remove cable cross plate sub-assy and

valve cover

Remove screws fixing cable cross plate sub-
assy, then remove cable cross plate sub-assy.

Remove the screws fixing valve cover, then
remove the valve cover.

2. Remove top cover

Remove screws connecting the top cover
plate with front panel and right side plate,
then remove the top cover.

3. Remove front grille

Remove connection screws between the
front grille and the front panel. Then remove
the front grille.



Warning: Be sure to wait a minimum of 20 minutes
after turning off all power supplies and discharge the
refrigerant completely before removal.

Installation and Maintenance

Service Manual

11.2 Removal Procedure of Outdoor Unit

Procedure

Steps

1.Remove cable cross plate sub-assy
and valve cover

3.Remove front grille

2.Remove top cover

Remove the screws fixing cable cross plate

sub-assy and then remove the cable cross plate

sub-assy.

Remove the screws fixing valve cover and then

remove the valve cover.

Remove connection screws connecting the

top cover plate with the front panel and the

right side plate,and then remove the top

cover.

Remove connection screws between the

front grille and the front panel. Then remove
the front grille.

top cover

cable cross plate

sub-assy

valve cover

front grille

Warning: Be sure to wait for a minimum of 20 minutes
after turning off all power supplies and discharge the
refrigerant completely before removal.

NOTE: Take

WH12QC-A3DNA6E/O for example.

Installation and Maintenance

Service Manual

11.2 Removal Procedure of Outdoor Unit

Procedure

Steps

1.Remove cable cross plate sub-assy
and valve cover

3.Remove front grille

2.Remove top cover

Remove the screws fixing cable cross plate

sub-assy and then remove the cable cross plate

sub-assy.

Remove the screws fixing valve cover and then

remove the valve cover.

Remove connection screws connecting the

top cover plate with the front panel and the

right side plate,and then remove the top

cover.

Remove connection screws between the

front grille and the front panel. Then remove
the front grille.

top cover

cable cross plate

sub-assy

valve cover

front grille

Warning: Be sure to wait for a minimum of 20 minutes
after turning off all power supplies and discharge the
refrigerant completely before removal.

NOTE: Take

WH12QC-A3DNA6E/O for example.

Installation and Maintenance

Service Manual

11.2 Removal Procedure of Outdoor Unit

Procedure

Steps

1.Remove cable cross plate sub-assy
and valve cover

3.Remove front grille

2.Remove top cover

Remove the screws fixing cable cross plate

sub-assy and then remove the cable cross plate

sub-assy.

Remove the screws fixing valve cover and then

remove the valve cover.

Remove connection screws connecting the

top cover plate with the front panel and the

right side plate,and then remove the top

cover.

Remove connection screws between the

front grille and the front panel. Then remove
the front grille.

top cover

cable cross plate

sub-assy

valve cover

front grille

Warning: Be sure to wait for a minimum of 20 minutes
after turning off all power supplies and discharge the
refrigerant completely before removal.

NOTE: Take

WH12QC-A3DNA6E/O for example.

Summary of Contents for AWH09QB-A3DNA5K/O










































Search results

Summary of Contents for AWH09QB-A3DNA5K/O

Reviews:

Related manuals for AWH09QB-A3DNA5K/O

Brands by name

Popular brands

AC Pro AWH09QB-A3DNA5K/O, Service Manual

Search results

Summary of Contents for AWH09QB-A3DNA5K/O

Reviews:

Related manuals for AWH09QB-A3DNA5K/O

Brands by name

Popular brands