36
Technical Information
Step
Procedure
10. Remove motor and cross flow blade
a. Remove screws fixing motor clamp then
remove the motor clamp.
b. Remove screws at the connection place of
cross flow blade and motor; lift the motor
and cross flow blade upward to remove.
Remove bearing holder sub-assy.
Remove screw fixing step motor then
remove step motor.
95
Installation and Maintenance
Service Manual
Procedure
Steps
Remove the screws fixing motor clamp
and then remove the motor clamp.
Remove the screws at the connection
place of cross flow blade and motor; lift
the motor and cross flow blade upwards
to remove them.
Remove the bearing holder sub-assy.
Remove the screw fixing step motor and
then remove the step motor.
Screws
Screw
Motor clamp
10. Remove motor and cross flow blade
Motor
C
ross flow
Holder
sub-assy
Step motor
Screws
a
b
