
Mounting/Installation
21
VdS
Verband der Schadensversicherer (German Association
of Insurers against Loss or Damage); defines guidelines
for different safety and security levels.
VDS-A for the non-commercial sector
VDS-Home for home risk management systems
VDS-B for the commercial sector
VDS-C for banks and jewellers (high-risk commercial
entities)
Flood detector
For detecting water damage and flooding, consisting of
a basic device and water sensor. The sensor is always
mounted at a point where flooding would first start to
incur water damage.
Certifications
Inspection seal from an independent body that ensures
the high quality and safety of alarm systems (in Germany
the following are relevant: certification as per POS in
accordance with accident prevention regulations and VdS
loss prevention)
Zone
Another term for a line. Describes a closed circuit to
which alarm or tamper contacts are connected, which are
then connected to the alarm panel. With wireless zones
usually one zone is used per detector.
Force Set
Zones with this attribute, if opened, are automatically
omitted when the alarm system or a partition is armed.
Mounting/Installation
Connection overview, terminal block
No Name/function
No Name/function
1
DC IN 13.8 V +:
connection for voltage supply 13.8 V
6
NO2, C2, NC2
–
relay output 2:
potential-free relay contact, 30 V DC, 24 V AC rms,
500 mA
Summary of Contents for SECVEST
