Abus SECVEST, Installer Manual

Page: 135 / 171

Configuration
135
Name/function Explanation (checkbox)
Service Centre Tel. Enter the number to dial for the service centre (F-SMSC) given to you.
The service centre number and protocol must correspond.
Contact your service provider's technical support.
When enquiring after the number of the service centre, ask which protocol it supports.
Store the service centre number (number of the SMS service centre for SMS
messages from the landline).
The country-specific numbers can be found in the appendix "SMS notifications".
Note
To send SMS messages from the GSM network (starting from the GSM module)
the number of the SMS service centre for the network operator in question is
already stored on the SIM card.
You can check the number stored there using a mobile phone if necessary.
A selection can be found in the appendix "SMS notifications", second part.
Own Telephone No
Some SMS service centres or protocols require the calling number before they
accept a processing request for an SMS message. (This is also used for clear
invoicing of SMS messages.) Enter the Secvest landline number here.
Only available when one of the following UCP protocols has been selected in the
dropdown menu:
•
UCP 8N1
•
UCP 7E1