34
SETUP MENU
CAMERA
ID OFF
SENSE
UP OFF
LIGHT CNTL
WD MODE
WHITE
BAL ATW
PICTURE
GAMMA
D/N CNTL
FOCUS
ADJ
MISC
END INIT UNLOCK
9. General operating notes on program menu
1. Press ENTER to open the program menu.
2. Press the UP/DOWN keys to select a menu item.
3. Press ENTER again to open the submenu of the selected menu item
or to confirm your setting.
4. To close the program menu, select “END” with the cursor. The display starts to flash.
Now press ENTER.
5. To reset all factory settings, select “INIT” with the cursor and then press ENTER.
(For emergency cases only!)
6. To change the position of the program menu, select “ ” with the cursor and confirm your
input with ENTER. With every press, the position of the program menu is moved one line
up.
7. You can lock access to the program menu to prevent unauthorised access as follows: Select
UNLOCK with the cursor and then press ENTER. To lock the program menu, use the control
keys to select “LOCK”. Now close the program menu by selecting END.
If no further entries are made via the program menu for 2 minutes, all changes are saved
and the program menu is closed.
TO ACCESS A LOCKED PROGRAM MENU, PRESS THE CONTROL
KEYS IN THE FOLLOWING ORDER: UP, DOWN, DOWN, RIGHT,
ENTER.
