Important safety information
13
Important safety information
Explanation of symbols
The following symbols are used in this manual and on the
device:
Symbol
Signal
word
Meaning
Warning
Indicates a risk of injury or health
hazards.
Warning
Indicates a risk of injury or health
hazards caused by electrical
voltage.
Important Indicates possible damage to the
device/accessories.
Note
Indicates important information.
The following annotations are used in the text:
Meaning
1.
…
2.
…
Required action to be carried out in a set order
…
…
List without a set order, given either in the text
or warning notice
Intended use
Only use the device for the purpose it was designed and
built for. Any other use is not considered to be the
intended use.
This device may only be used for the following
purpose(s):
In combination with connected video signal sources
(analogue/HD-TVI cameras) and video output
devices (TFT monitor), this 16-channel HD-TVI video
recorder is for the monitoring of objects.
Note
Data storage is subject to national data privacy
guidelines.
When carrying out the installation advise your
customers of the existence of this guideline.
General
Before using this device for the first time, please read the
following instructions carefully and observe all warning
information, even if you are familiar with the use of
electronic devices.
Warning
All guarantee claims are invalid in the event of
damage caused by non-compliance with this user
manual.
We cannot be held liable for resulting damage.
Warning
In the event of personal or material damage
caused by improper operation or non-compliance
with the safety information, we cannot be held
liable.
All guarantee claims are void in such cases.
Retain this handbook for future reference.
If you sell or pass on the device on to third parties, you
must include these instructions with the device.
This device has been manufactured in accordance with
international safety standards.
Power supply
Only operate this device through a power source
which supplies the mains power specified on the type
plate.
If you are unsure of the installation location's power
supply, contact your power supply company.
Warning
Prevent data loss.
Always use the device with an uninterruptable
power supply UPS with surge protection.
Disconnect the device from the power supply before
carrying out maintenance or installation work.
The on/off switch on this device does not fully
disconnect it from the mains supply.
To fully disconnect the device completely from the
mains, the mains plug must be withdrawn from the
mains socket. The device should therefore be
positioned so that there is always direct and
unimpeded access to the mains plug and the plug
can be removed immediately in the event of an
emergency.
To eliminate the risk of fire, the mains plug should be
removed from the mains socket prior to an extended
period of non-use. Prior to unstable weather and/or
when there is a danger of lightning strike, separate
