Abus 4043158063110 User Manual Download Page 12

Page: 12 / 68

Quickstart guide

Before you start

The following preparations must be completed:

1. Pay attention to the general information, safety

information as well as statements on placement and
connection, see page 13.

2. Check the contents of the package for completeness

and damage.

Note

Note the remarks in the separate quickstart guide.

Installing the hard disk drive

Warning

Switch the device off and disconnect it from the
mains electricity.
Ensure proper earthing to avoid static discharge.

1. Install a hard disk drive, see separate quickstart

guide.

2. First make a connection to the motherboard with the

blue data cable (small connector).

3. Connect the power cable (large connector, 5-core).

4. Check that the connections are firmly in place.

5. Close the housing.

Note

Only use hard disk drives that are authorised for
video recording and 24/7 operation.

Make the connections

Note

Observe the minimum radius when laying the
cables. Do not kink the cables.

1. Connect all cameras to the recorder.

2. Connect the recorder to the LAN via the network

cable.

3. Connect the monitor using the VGA or HDMI

connection.

4. Connect the mouse to the USB port.

5. Connect the device to the mains power supply, it will

then start automatically.

Configuring the device

Note

Note the remarks in the separate quickstart guide.



Carry out the individual steps in the 'setup wizard ',
see page. 18.



The following settings are configured one after the
other: (Sequence)



Select the operator console language



Administrator configuration



Time settings (date, time etc.)



Network settings



Hard disk drive management (initialisation etc.)



Camera settings



Recording settings

Note

From the ABUS home-page (www.abus.com),
find out if new firmware updates are available
for this device and install these.

Note

Later alteration of date and time can lead to loss of
data.



Note the menu overview on page 26, as well as the
information and explanation of the basic operation of
the system on page 5.

Note the explanation of:

Live view

page 21

playback

page 24

Data export

page 44

Troubleshooting

page 62

Summary of Contents for 4043158063110





































































Search results

Summary of Contents for 4043158063110

Reviews:

Related manuals for 4043158063110

Brands by name

Popular brands

Abus 4043158063110, User Manual

Search results

Summary of Contents for 4043158063110

Reviews:

Related manuals for 4043158063110

Brands by name

Popular brands